Overview
Osmo Polyx Hard Wax Oil Tints is a tinted satin wood finish ideal for use on interior wooden floors and furniture as it protects and colours whilst allowing the natural wood grain to remain visible. One of Osmo's most popular products the Polyx Oil Tints are stain-resistant, water repellent, and abrasion-resistant. The use of natural oils and waxes creates an even colour and harmonious appearance whilst protecting your interior wood without cracking, peeling, or flaking. Along with easy application and no need for primer this really is the go-to product for wooden floors and furniture.
- Extremely durable and hardwearing
- Does not crack, peel or flake
- Resistant to household spillages e.g. juice, tea, and wine
- Enhances the wood’s natural character
| Area | Interior |
| Recommended Use | Interior wooden floors and furniture |
| Base | Oil-Based |
| Coverage | Up to 30m² per litre |
| Drying Time | 24 Hours |
| Re-Coat Time | 24 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush or Roller |
| VOC Levels | High |
Preparation
Always ensure the surface is clean and free from grease, dust and frost.
- Clean old microporous stains (wood oils).
- Old paints and lacquers must be completely removed this can be done by sanding back or using a suitable chemical stripper.
- Sand the surface carefully, starting with a coarse sandpaper and finish fine grade. For flooring 120-150 and for furniture 180-240.
- Before application ensure all dust has been removed.
Application
Always test a small area of the surface to be treated before application to ensure you are happy with the finished look.
- Stir well before use.
- Osmo Polyx Oil is ready to use and does not require thinning.
- Use a Osmo Flat Brush, floor brush or microfibre roller.
- Apply thinly working in the direction of the wood grain and spread well.
- Allow to dry for 8-10 hours under good ventilation.
- After drying quickly apply a second coat.
- If re-coating one coat should be sufficient.
Note: Always follow the manufacturer instructions found on the tin.
Aftercare & Storage
Cleaning
Clean the surface regularly with a duster or vacuum, for spillages and a more intensive clean use Osmo Wash and Care with a damp mop. Avoid over saturating the surface with water. For furniture use the .
Maintenance
For cleaning stains and stubborn scuff marks on the satin finish use Osmo Liquid Wax cleaners.
When signs of wear become visible on the surface re-apply one coat of Osmo Polyx Oil to a cleaned and dried surface.
